Asbestos Tile Floor Removal

Posted on

Asbestos Tile Floor Removal, asbestosdefinition.com | Asbestos tile floor removal is a fairly simple task. The most important factor is determining which type of asbestos is present in the home and then knowing how to remove it safely.

Residential Asbestos Tiles is made from asbestos fibers. If you have an affected home, chances are that you may also have an affected floor. Residential Asbestos Floor removal is somewhat similar to removing flooring, but with a few key differences. First, residential asbestos tiles do not pose a fire risk, and they are much easier to remove and replace.

Asbestos Tile Floor Removal
By https://wynnwhite.com/asbestos-3/removing-asbestos-floor-tile/

Industrial Asbestos Removal These tiles are actually much more dangerous than residential tiles. Asbestos fibers are used in industrial tile flooring. When this material is exposed to fire, asbestos fibers will release again. In a short amount of time, this would cause an explosion that could potentially kill you or the people you love.

Residential asbestos removal companies will carry special equipment and trained individuals who are training to remove these floors safely. This includes removing asbestos tile flooring.

Because the equipment used in asbestos removal is expensive, it is important that you hire a trained and experienced asbestos removal team. To find a good professional team, check with your state’s Department of Labor or Health Division.


Average Cost of Asbestos Tile Removal


There are a few basic steps to take when cleaning a tile floor. A good first step would be to thoroughly wash the entire area, removing any hazardous materials as you go.

Commercial Grade Disinfectants – The best method for removing asbestos is to use commercial grade disinfectants. Before you begin the cleaning process, make sure that you have a complete list of the products needed. Commercial disinfectants should contain a combination of bleach and ammonia. Soft Brush – Next, you should wet the entire surface with a soft brush. After this, the entire surface should be scrubbed with the cleaner and warm water, making sure to leave the carpet wet. By doing this, the chemicals in the cleaner will spread throughout the flooring and fiber dust will start to disperse throughout the home.

Carpet – The next step would be to clean the carpet. You should begin by vacuuming the carpet and dragging it up and down to get all of the dust and dirt out. To get rid of the small pieces, a toothbrush can be used.

Neutralize Bleach – After you have cleaned the floor, you can then neutralize bleach to clean it. Once the bleach has neutralized, you can start to vacuum the area again. This step is imperative, because you do not want to end up with a dirty floor, that can catch on fire and cause a big mess.

Cleaner – Once you have done the initial cleaner, you can now vacuum it and dry it off completely. Make sure to clean the area thoroughly so that the floor will be free of any dust or fibers that may have gotten into the carpet.

The important thing to remember when it comes to asbestos floor tile removal is that if you have this kind of flooring, you should have it professionally cleaned as soon as possible. Otherwise, there is a very real chance that you could catch an illness that is associated with asbestos.

 

1 comment

Leave a Reply

Your email address will not be published. Required fields are marked *