What Are The Risks Of Asbestos Tile Bathroom?, asbestosdefinition.com | Asbestos tile was once one of the most popular forms of bathroom tiles because it was an excellent insulator of water and it didn’t heat up as fast as other forms of tile. However, as it was laid on a hard surface, the asbestos fibers were worn away, leaving more openings for moisture to be released, which would then cause the tile to expand and contract, causing ripples in the tile that lead to holes in the water-repelling material.
Today, it is rare to find any type of bathroom tiles made from asbestos. However, there are still plenty of instances where people have become ill due to the asbestos fibers released when the tile was laid. Whether you are choosing to install new tile, re-tile or have your old tile replaced, you will want to know what is in the tiles you are about to install.
Unfortunately, you can’t easily tell if a tile is made from asbestos just by looking at it. It’s not like you can ask the seller how old the tile is or a picture of the tile will show you how old it is. However, you can usually tell if a tile is made from asbestos based on how long it has been exposed to moisture, which can cause asbestos fibers to start showing up.
When choosing an asbestos tile bathroom, you should inspect the edges of the tile that is made from asbestos. In some cases, a tiny amount of asbestos could be present in the tile and it won’t be obvious on the surface. However, if you’ve tried to smooth out a small area with a tile sanding wheel and can’t get rid of it, you should be worried.
It is recommended that you remove all tiles from the bath before re-painting. This is because asbestos tiles tend to settle in high water levels, which can cause cracks. Also, check to make sure all pieces are level before putting them back together, since that will help avoid damaging the floor beneath the new tile.
Once you have removed the tiles, you will want to use a vacuum cleaner to remove as much of the dust and dirt as possible. Cleaning a tile floor that was made from asbestos will require a different method than cleaning a tile that wasn’t made from asbestos. The easiest way to clean an asbestos floor is to use a tile stripper. Tile strippers aren’t meant to damage natural stone floors and will leave little marks on the tiles, so it’s best to avoid using them unless absolutely necessary.
Instead, a good idea is to use a damp rag to scrape off as much dirt as possible before re-painting the tile. Remember to use mild chemicals to make sure the stripper doesn’t do too much damage to the marble or natural stone tile.
Once you have re-painted the tiles, make sure you follow the manufacturer’s instructions for adding in concrete sealer to specific asbestos tiles. You can then use a sealant to fix the tile back into place, but it’s always best to let the sealant to dry for several hours before re-installing the tile.
Depending on the color of the tile you have chosen, you may need to use a primer or varnish before installing the tile. Primers and varnishes will protect the marble and stone from being damaged by the grout lines that can form over time. After priming, you can use your hands to apply the sealant.
However, if you need to do more than one treatment, try to use one application of sealant to prevent the most possible damage to the tiles. If you’ve had your tile treated in the past, it is best to reapply a thin coat to protect the tile from further exposure to the chemicals used in the treatment.
Once you have completed the treatments, you will need to clean the grout of the tile. Make sure to use a brush to remove all remnants of the sealant and to sand off any scratches.
Overall, replacing your old asbestos tile bathroom with a new tile will give you years of enjoyment in your bathroom. However, it’s important to always keep in mind the importance of keeping the tile free of molds and dirt, and mold and mildew.